Kolberg "Concert" tubular bell set, made of bell brass produced exclusively for Kolberg Percussion. A worldwide unique design with exceptional tonal qualities and a very practically orientated tubular bell stand.

 

Tonal rangef1 - f3 (2 octaves), international F4-F6
Pitch443 Hz (other pitches available on request)
Tube diameter42 mm/1.65"
Materialexclusive bell brass
Surface variations: 
- Standard:lacquered
- Additional chargehigh-gloss chrome-plated
Stand dimensions c2 - f3 (WxDxH)100 x 60 x 180 cm
Stand dimensions f1 - h1 (WxDxH)50 x 51 x 215 cm

 

The 2 octaves Kolberg "Concert" tubular bell set 2450 is particularly suited to use in a fixed position such as concert halls, recording studios or rehearsal rooms. The length of the bells and their weight make the set difficult to transport. For this reason we recommend the 2 octave instrument is divided between two mobile stands. Alongside the transportation advantage, the shorter bells in the most used range c2 - f2/C5-F5 can be played at a lower, more comfortable height. The side stand for the 7 supplementary bells f1 - h1/F4-B4 is height adjustable and has removable damping bars. It can be fitted individually with single bells and be accordingly adjusted in height.

 

Bells

The particularly large tube diameter, extra thick walls and tubes closed at both ends produce the exceptionally pure tonal quality, unique volume of sound and the very long reverberation of the "Concert" series. The very strongly rounded contact head provides the bell hammer with an enlarged contact surface, creating a warm tonal character and hugely increasing the bell's volume. This volume rich tone with clear, bell like attack and rich resonance perfectly imitates the tonal characteristics of a cast church bell. It is therefore a very good tonal and transport friendly alternative. All "Concert" tubular bells in the f1 - f3/F4-F6 (2 octaves) range are also individually available. Upon request bells can be custom made in the range from c1 - e1/C4-E4 and f#3 - c4/F#6-C7.

 

Note on pitch/notation

Notation: f - f2/F3-F5
Pitch: one octave higher (f1 - f3/F4-F6)

From Karl Peinkofer in the "Handbuch des Schlagzeugs" (2nd edition 1981, pg. 75): "The definition "pitch as written" refers to the reverberation sound, as in the tonal blend of the attack the upper octave dominates."

 

Quality features

The contact head of the bell is connected to the tube by a special process meaning that it cannot become loose through vibrations occurring during playing, causing disturbing noises or becoming detached. The particularly strongly rounded, therefore increased contact surface of the bells, the unusually thick walls (3.5 mm), the especially large tube diameter and tubes closed at both ends produce the exceptionally rich tonal quality, the volume of sound and the bell like character of the Kolberg "Concert" tubular bells, which in design are unique on the world market.

 

Tubular bell suspension

We use specially woven, heavy duty nylon cords on all of our products, which are produced exclusively for Kolberg Percussion. These special, high quality cords do not cause any vibrational noise, are extremely durable and convenient to use.

 

Tubular bell stand 1.5 octaves (c2 - f3)

  • Extremely stable four column tubular steel construction, scratch and impact resistant black-silver powder-coated. Upon request also available as height adjustable.
  • All structural components are welded and therefore completely connected, ensuring they do not warp or vibrate. The sound of the bells can develop freely and is not affected by unwanted noises caused by the stand.
  • Stable fully locking swivel casters with a solid rubber surface, height adjustable to compensate for uneven floors.
  • Features:
    • The four main pillars of the Kolberg tubular bell stands can be fitted with height adjustable, pivoting extension arms. These extension arms accord to the standard dimensions of the combination stand system and allow various mounting options for additional bells, instruments, music stands, trap trays etc.
    • On the outer bar of the chromatic bell row there is a carriage with two receiving holes, fitted as standard on the combination stand system. The carriage allows music stands and mirrors to be adjustably mounted to it either vertically or horizontally.
  • Damping
    A speciality of the Kolberg tubular bell sets is the very effective and reliable damping system. Large damping surfaces made from thick, very sound absorbing wool felt plates in front of and behind the bells allow a fast and instant damping of the huge bell sound after pedal use. The damping surfaces of the "Concert" tubular bell set are matched precisely to the length of the bells meaning damping works flawlessly even on deep tones, with great volume or polyphonic chords. The Kolberg damping system operates completely silently through belts and leaf springs and remains maintenance free over a long period of time.
  • Removable damping bars and individual suspension of the tubular bells
    A very practically orientated feature is the possibility to remove the front, diatonic, and the back, chromatic damping bars. All tubular bells can be removed horizontally from the set with ease. This offers an enormous advantage in cramped and height limited situations such as in an orchestra pit. The bells' individual suspension leads to the comfort and speed with which they can be detached. There is no need to raise two adjacent tubes in order to remove an individual tubular bell!
  • Pedal
    The chromed damping pedal extends over the whole width of the instrument and can be individually height adjusted. Stable, soft rubber buffers on the damping bar eliminate noise transmission to the ground.
  • Accessories (included)
    • 2 pivoting extension arms
    • 1 combination stand standard carriage with music stand
    • 1 tray

 

Tubular bell stand for 7 "Concert" tubular bells (f1 - h1) (2458)

  • Height adjustable
  • Extremely stable tubular steel construction, scratch and impact resistant black-silver powder-coated
  • All structural components are welded and therefore completely connected, ensuring they do not warp or vibrate. The sound of the bells can develop freely and is not affected by unwanted noises caused by the stand.
  • Stable fully locking swivel casters with a solid rubber surface, height adjustable to compensate for uneven floors
  • The damping pedal uses springs ensuring it operates silently.
  • Features: As on the 1.5 octave tubular bell set, the side stand also has the comfort of the removable damping bars and the option of suspending individual bells.

The ideal solution for rehearsals, concert trips, narrow orchestra pits and opera performances with few or single tubular bells!

 

Accessories (included)

3 pairs tubular bell hammers ES845H, ES844H, 844M

 

Accessories (additional charge)

The perfectly matched range of accessories make Kolberg's products worldwide unique in the day-to-day work on stage. This maximizes the tonal development of the instruments, enables convenient handling for the musician and facilitates transport.

 

Mallets

In order to cover a wide sound spectrum and to form the characteristic bell sound, we provide a unique variety of mallets. Our range includes 15different tubular bell hammers - finely differentiated in size and hardness and with special attention paid to the weight. Additionally, other special and cluster mallets are available. We can advise you on your individual choice.

 

Transport

  • Transportation cover for 1.5 octaves 2455H-2455
  • Transportation cover for 1/2 octave 2458H-2458
  • Flight case for 1.5 octave tubular bell set RG2455
  • Flight case for 1/2 octave tubular bell set RG7-2458
  • Transportation cover for 6 tubular bells 2598
  • Flight case for 25 tubular bells 2458R
Tubular bells hammers, hard, red plastic
Tubular bells hammers, hard, red plastic
size / weight / total length medium / 350 g / 35 cm
Product number: 844M
size / weight / total length medium / 350 g / 35 cm
Product number: 844M

€109.85

incl. VAT
plus Shipping costs

Tubular bells hammers "Elastic"
Tubular bells hammers "Elastic"
size / weight / total length medium / 300 g / 35 cm
Product number: ES844H
size / weight / total length medium / 300 g / 35 cm
Product number: ES844H

€179.37

incl. VAT
plus Shipping costs

Tubular bells hammers "Elastic"
Tubular bells hammers "Elastic"
size / weight / total length large / 480 g / 35.5 cm
Product number: ES845H
size / weight / total length large / 480 g / 35.5 cm
Product number: ES845H

€193.28

incl. VAT
plus Shipping costs

Flight case for tubular bell set
Flight case for tubular bell set
equipment flight case swing door / ramp / protecting strips
for tubular bell set 2455
Product number: RG2455
equipment flight case swing door / ramp / protecting strips
for tubular bell set 2455
Product number: RG2455

€2,487.50

incl. VAT
plus Shipping costs

Flight case for tubular bell set
equipment flight case swing door/ ramp
for tubular bell set 2455
Product number: RG2455-SL
equipment flight case swing door/ ramp
for tubular bell set 2455
Product number: RG2455-SL

€2,348.45

incl. VAT
plus Shipping costs

Flight case for tubular bells with stand
Flight case for tubular bells with stand
equipment flight case protecting strips
for tubular bell stand 2458 and 14 tubular bells
Product number: RG7-2458
equipment flight case protecting strips
for tubular bell stand 2458 and 14 tubular bells
Product number: RG7-2458

€2,334.55

incl. VAT
plus Shipping costs

Flight case for tubular bells with stand
equipment flight case without protecting strips (BASIC)
for tubular bell stand 2458 and 14 tubular bells
Product number: RG7-2458-SL
equipment flight case without protecting strips (BASIC)
for tubular bell stand 2458 and 14 tubular bells
Product number: RG7-2458-SL

€2,195.51

incl. VAT
plus Shipping costs

Protective cover for tubular bell set 2455
Protective cover for tubular bell set 2455
Product number: RGH2455
Product number: RGH2455

€472.75

incl. VAT
plus Shipping costs

Protective cover for tubular bell set 2456
Protective cover for tubular bell set 2456
Product number: RGH2456
Product number: RGH2456

€443.56

incl. VAT
plus Shipping costs

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


Kolberg Percussion

CONTACT

Are you planning an on-site visit or do you have further questions? We will be happy to advise you personally.
Kolberg in Canada & USA
Alexander Haupt (Timpano Percussion)
+1 514 528 9535 info@timpano-percussion.com

Get personal advice

SECURE DELIVERY WORLDWIDE

Call us:
Mo - Thurs: 8 am - 4 pm and Fr: 8 am - 2 pm

EASY PAYMENT